Author Topic: Cannot communicate with Telescope  (Read 11 times)

0 Members and 1 Guest are viewing this topic.

Offline Kilian Hametner

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
  • Welcome to the Satellite Tracker Forum
Cannot communicate with Telescope
« on: May 17, 2019, 11:51:47 AM »
I am trying to connect my AZEQ6 with Satellite Tracker, but it always responds with "Cannot communicate with Telescope!".
The Mount can communicates with the EQMODLX and when i try another com port in ST it instantly says "Unable to initialize Serial Port". I think this means it knows there is a Connection to the Mount but it cannot communicate with it.

Mount >USB\RS232 cable > EQMOD HEQ5/EQ6 > EQMODLX > HWVSP > ST

Of course i have Meade LX200GPS Polar set.

Hope you can help me!

Nikolaj

Offline John Eccles

  • Owner of Satellite Tracker and Yahoo Satellite Tracker
  • Administrator
  • *****
  • Posts: 175
  • Karma: +0/-1
    • Satellite Tracker
Re: Cannot communicate with Telescope
« Reply #1 on: May 17, 2019, 12:09:16 PM »
The user manual located at this link (http://www.heavenscape.com/Forums/index.php?topic=49.0) is your best friend. Please review this manual while you are familiarizing yourself with the Satellite Tracker application.

Also the archived messages that were extracted from the original Yahoo Group (http://www.heavenscape.com/Forums/index.php?topic=80.0) has valuable information. You can do a search using your mount type and various other keywords as well.
« Last Edit: May 17, 2019, 12:11:59 PM by John Eccles »
Regards, John Eccles, Owner of Satellite Tracker Application, the Satellite Tracker Forum, and the Yahoo Groups called Satellite Tracker